Introduction; Conventions; Configuration And Operation Examples; Protocol Acronyms - HP ProCurve 2910al Switch Manual

Getting Started

Introduction

IP Refers to the IPv4 protocol unless otherwise noted.
IPv6 Refers to the IPv6 protocol.
1-2

Introduction

This guide is intended for use with the following switches:
■ HP ProCurve 2910al Switch
It describes how to use the command line interface (CLI), Menu interface, and
web browser to configure, manage, monitor, and troubleshoot switch opera­
tion. For an overview of other product documentation for the above switches,
refer to "Product Documentation" on page xi. You can download documenta­
tion from the ProCurve Networking web site, www.procurve.com.

Conventions

Configuration and Operation Examples

Unless otherwise noted, examples using a particular switch model apply to all
switch models covered by this guide.

Protocol Acronyms

Command Syntax and Displayed Information

Command Syntax Statements

Syntax: ip < default-gateway < ip-addr >> | routing >
Syntax: show interfaces [port-list ]
■ Vertical bars ( | ) separate alternative, mutually exclusive elements.
Square brackets ( [ ] ) indicate optional elements.
■
■ Braces ( < > ) enclose required elements.
■ Braces within square brackets ( [ < > ] ) indicate a required element within
an optional choice.