REMOVE PACKAGED
CONTENTS (CONTINUED)
Catch pan holder
Catch pan
Drip pan
Stainless steel bottom shelves
(For Summit 425 and 625)
Wire bottom rack
(For Summit 450 and 650)
Stainless steel work surface (2)
Condiment holder (2)
Tool holder (4)
Hose
ADD COOKING MODULE
Caution: Use two people to lift and install the
cooking module.
Lift the cooking module out of the packaging. The gas
line, regulator, and bracket will hang below the module.
Lower the module on an angle into the cart so the control
panel is under the front top frame rail. Figure 2. Guide the
gas line regulator and bracket while lowering the module
into the cart.
Lower the back of the cooking module down so it is
between the two flanges in the back panel. Figure 3.
Use caution not to scratch the paint of the cooking
module when setting the module between the flanges.
The cooking module should be level, setting on the front
and rear top frame rails.
Front top
frame rail
4
View from
Figure 2
Flange
Rear top
frame rail
View from
Figure 3
Flange
right
right