INSTALL STEAM-N-CHIPS
SMOKER
You will need: Steam-N-Chips smoker.
Remove the center Flavorizer bar (the one that is not over
a burner). Set the handles of the Steam-N-Chips smoker
on the Flavorizer bar holder. Figure 13 (a).
Note: For directions on how to use the Steam-N-Chips
smoker, see the Operating Guide.
a)
To regulator
Summit 475
Figure 13
To regulator
Summit 675
Figure 13
ADD COOKING GRATES
You will need: two (Summit 475) or three (Summit 675)
cooking grates.
The cross-wire of the cooking grate goes down. Set the
cooking grates in place next to each other. Figure 14.
9
To regulator
Figure 14