Table of Contents
Advertisement
R E I N S TALL CONTROL
PA N E L
You will need: control panel.
Pull igniter buttons up until they stay in the up position.
Place the control panel into the grooves on either side of
the front of the cooking box. Push the control panel into
place, using even pressure while pushing. Figure 25 (a).
Use your fingers to lift the front edge of the control panel
slightly and set it into the recess on both sides of the
cooking box. Figure 25.
(a)
Front Panel
Control Panel
Figure 25
REINSTALL BURNER
CONTROL KNOBS
You will need: four (Summit 425 or 450) or six
(Summit 625 or 650) burner control knobs.
Push on the burner control knobs. Figure 26.
14
Figure 26
Advertisement
Table of Contents
