INSTALL STEAM-N-CHIPS
SMOKER
You will need: smoker box.
Remove the center Flavorizer bar (the one that is not over
a burner). Set the handles of the Steam-N-Chips smoker
on the Flavorizer bar holder. Figure 8 (a).
Note: For directions on how to use the Steam-N-Chips
smoker, see the Operating Guide..
a)
ADD COOKING GRATES
You will need: two cooking grates.
The cross-rail of the cooking grate goes down. Set the
cooking grates in place next to each other. Figure 9.
Figure 8
Figure 9
INSTALL WARM-UP
BASKET
You will need: warm-up basket.
Install one end of the warm-up basket into the hole on the
right end of the lid and the other end into the slot in the
left end of the lid. Figure 10 (a).
a)
INSTALL BURNER
CONTROL KNOBS
You will need: four burner control knobs.
Push on the burner control knobs. Figure 11.
6
Figure 10
Figure 11