Dialing Up Using Rndis - Neoway N720 User Manual

N720 User Manual (Linux)
3. Compile the kernel again and burn the kernel to the host.
4. Power up the host and check whether the usb0 is displayed.
5. Query whether the RNDIS driver is loaded successfully.
Input lsusb –t.
Input lsmod | grep rndis.

5.4 Dialing Up Using RNDIS

1. Run the following commands to confirm that N720 registered a network.
AT+CPIN? //Query SIM card status.
AT+CSQ //Query signal.
AT+CREG?
AT+CGREG?
AT$MYSYSINFO
Copyright © Neoway Technology Co., Ltd
//Query network mode.
21