N720 User Manual (Linux)
Input ifconfig to check NIC information.
If a new NIC, e.g. eth1, is displayed, the driver is loaded successfully.
7.
Check if qcqmi1 is created successfully.
4.4 Configuring Before Dialup
To dial up and set a connection through RMNET on Linux, developers need to use Neoway dialup
program.
Execute make under the NWY-CM-code/src directory to obtain the NWY-CM program. Assign the
NWY-CM program execution permission.
Input NWY-CM-h to check Help.
Copyright © Neoway Technology Co., Ltd
16