Kärcher CWB 3 Original Operating Instructions page 34

Preparing the vehicle
ATTENTION
Risk of damage to vehicles when using the CareTouch
brushes
Equip the system with a high pressure attachment kit or pre-wash
the vehicles when using the CareTouch brushes.
ATTENTION
Damage to the system and the vehicle
To prevent damage to the vehicle, take care to ensure that the fol-
lowing measures are taken before starting the system.
1. Close all windows, doors and sunroofs.
2. Retract all antennas, fold them towards the rear or remove
them.
3. Fold in any large or wide projecting mirrors.
4. Check the vehicle for any loose vehicle parts and remove
these, e.g.:
 Trim strips
 Spoiler
 Bumpers
 Door handles
 Exhaust pipes
 Wind deflectors
 Tarpaulin ropes
 Rubber seals
 Externally mounted sun visors
 Luggage racks
Driving in the vehicle
The positioning light assists the customer in positioning the vehi-
cle correctly.
Drive forwards
1
Stop, position OK
2
Drive in reverse
3
1. Position the vehicle straight ahead and centrally between the
guide rails.
After positioning
1. Switch off the motor.
2. Engage a gear.
3. With an automatic transmission, select "P".
4. Apply the handbrake.
5. Check that all instructions in Preparing the vehicle have been
followed.
6. Exit the vehicle (all persons).
7. Start the washing program.
Starting the program
At the wash card/code reader
Note
Operation with a wash card/code reader is described in the sep-
arate operating instructions for the wash card/code reader.
34
Start the program on the display
1. Press the "Wash" button.
2. Select the desired washing program.
3. Select the desired options and confirm with "OK".
4. Start the washing program.
English