Troubleshooting; Resetting To Factory Defaults; Wiring Schematic - Watts PVI Aqua Solve Family Installation Manual

Hide thumbs

Table Of Contents

Table of Contents

RESETTING TO FACTORY DEFAULTS

To reset the electronic controller to its factory default

RESETTING TO FACTORY DEFAULTS

for all settings (time, hardness, etc.):

To reset the electronic controller to its factory default for

To reset the electronic controller to its factory default

all settings (time, hardness, etc.):

1. Press the SELECT / MENU button and hold it until

for all settings (time, hardness, etc.):

1. Press the SELECT/MENU button and hold it until

the display changes twice to show the flashing

1. Press the SELECT / MENU button and hold it until

the display changes twice to show the flashing

model code.

the display changes twice to show the flashing

2. Press the UP button (a few times, if necessary)

2. Press the

UP button (a few times, if necessary)

model code.

to display a flashing "SoS".

2. Press the

UP button (a few times, if necessary)

to display a flashing "SoS".

3. Press the SELECT / MENU button, and the elec-

3. Press the SELECT/MENU button, and the electronic

tronic controller will restart.

controller will restart.

3. Press the SELECT / MENU button, and the elec-

4. Set the present time, hardness, etc., as described

tronic controller will restart.

4. Set the present time, hardness, etc., as described

in this manual

4. Set the present time, hardness, etc., as described

in this manual

NOTE: Connect optional chlorine

generator to terminal J4

(24V half-wave DC).

24 VAC

Transformer

Turbine

Sensor