Recharge Now; Recharge Tonight - Watts PVI Aqua Solve Family Installation Manual

Controller Features / Options

RECHARGE NOW

RECHARGE NOW
At times of greater than normal water use, such
At times of greater than normal water use, such as
as when you have guests, you could run out of
when you have guests, you could run out of condi-
conditioned water before the next scheduled recharge.
tioned water before the next scheduled recharge. If
If this happens, you may want to initiate an immediate
this happens, you may want to initiate an immediate
regeneration, as follows:
regeneration, as follows:
1. Press the RECHARGE button and hold for 3
1. Press the RECHARGE button and hold for 3 sec-
seconds, until the words "RECHARGE NOW"
onds, until the words "RECHARGE NOW" flash in
flash in the display.
the display.
RECHARGE NOW initiated RECHARGE NOW initiated
The softener enters the fill cycle of regeneration
The softener enters the fill cycle of regeneration
immediately. "RECHARGE NOW" will flash during
immediately. "RECHARGE NOW" will flash during
the regeneration. When completed (in about 2
the regeneration. When completed (in about 2
hours), full water conditioning capacity is restored.
hours), full water conditioning capacity is restored.
NOTE: If the "Clean Feature" is set ON, the normal
NOTE: If the "Clean Feature" is set ON, the normal
regeneration cycle is preceded by a cleaning regeneration cycle is preceded by a cleaning regeneration cycle is preceded by a cleaning
backwash and rinse.
backwash and rinse. backwash and rinse.

RECHARGE TONIGHT

If you do not want to start an immediate recharge, but
would like an extra recharge at the next preset
recharge start time, do the following to schedule a
recharge:
1. Press and release (do not hold) the RECHARGE
button.
RECHARGE TONIGHT initiated RECHARGE TONIGHT initiated
The words "RECHARGE TONIGHT" flash in the dis-
play, and the softener will recharge at the next preset
recharge time (If you decide to cancel the regenera-
tion before it begins, press and release the
RECHARGE button once more, and "RECHARGE
TONIGHT" will disappear from the display). During
regeneration, the words "RECHARGE NOW" will flash
in the screen. When completed, full water condition-
ing capacity is restored.
10
Controller Features / Options
FIG. 24
FIG. 25
The softener enters the fill cycle of regeneration
immediately. "RECHARGE NOW" will flash during
the regeneration. When completed (in about 2
hours), full water conditioning capacity is restored.
NOTE: If the "Clean Feature" is set ON, the normal
regeneration cycle is preceded by a cleaning
backwash and rinse.
RECHARGE TONIGHT
RECHARGE TONIGHT
If you do not want to start an immediate recharge,
If you do not want to start an immediate recharge, but
but would like an extra recharge at the next preset
would like an extra recharge at the next preset
recharge start time, do the following to schedule
recharge start time, do the following to schedule a
a recharge:
recharge:
1. Press and release (do not hold) the RECHARGE
1. Press and release (do not hold) the RECHARGE
button.
button.
RECHARGE TONIGHT initiated
FIG. 24
The words "RECHARGE TONIGHT" flash in the dis-
The words "RECHARGE TONIGHT" flash in the
play, and the softener will recharge at the next preset
display, and the softener will recharge at the next
recharge time (If you decide to cancel the regenera-
preset recharge time (If you decide to cancel the
tion before it begins, press and release the
regeneration before it begins, press and release the
RECHARGE button once more, and "RECHARGE
RECHARGE button once more, and "RECHARGE
TONIGHT" will disappear from the display). During
TONIGHT" will disappear from the display). During
regeneration, the words "RECHARGE NOW" will flash
regeneration, the words "RECHARGE NOW" will
in the screen. When completed, full water condition-
flash in the screen. When completed, full water
ing capacity is restored.
conditioning capacity is restored.
FIG. 25
FIG. 25
12