FANATEC CSL Elite Racing Wheel Manual page 36

Put the H-pattern shifter lever into the position shown on the LED display and
acknowledge each single position by pressing
the next step.
The following pictures show the instructions on the LED display of the CSL
Elite Steering Wheel (PS4
wheels:
If your shifter has no 7th gear, acknowledge it by pressing
when the shifter lever is physically in the 6th gear position. After all gears are
calibrated the LED display shows S_1 and the shifter is ready for use.
NOTE:
ply complete the calibration process either without a connected shifter or
without moving the shifter lever. You may then leave the shifter calibra-
tion mode at the end of the process. This has no impact on the CSL Elite
Racing Wheel original calibration itself and you can continue without a
shifter.
36
version) but are similar on other Fanatec
TM
. . . . . . . . . . . . . . . . Neutral Position
. . . . . . . . . . . . . . . . . . . . . . .Reverse
. . . . . . . . . . . . . . . . . . . . . . . 1
. . . . . . . . . . . . . . . . . . . . . . . 2
. . . . . . . . . . . . . . . . . . . . . . . 3
. . . . . . . . . . . . . . . . . . . . . . . 4
. . . . . . . . . . . . . . . . . . . . . . . 5
. . . . . . . . . . . . . . . . . . . . . . . 6
. . . . . . . . . . . . . . . . . . . . . . . 7
If you did not intend to enter the shifter calibration mode sim-
/ START (10) to proceed to
Gear
st
Gear
nd
Gear
rd
Gear
th
Gear
th
Gear
th
Gear
th
/ START (10)
steering
®