Assembly; Plan Your Configuration; Mounting The Csl Elite Racing Wheel Using The Table Clamp - FANATEC CSL Elite Racing Wheel Manual

ASSEMBLY

6

6.1 Plan your configuration

To operate the CSL Elite Racing Wheel plug your steering wheel onto the quick
release shaft and get started. Connect the CSL Elite Racing Wheel to your
PlayStation 4 system or PC* by using the USB cable.
®
Please check the 'Connections' chapter to see which kind of peripheral devices
must be connected to which socket on the CSL Elite Racing Wheel. All devices
have to be connected to the CSL Elite Racing Wheel before powering ON to
allow proper detection and operation.
*PC compatibility not tested nor endorsed by Sony Interactive Entertainment LLC.

6.2 Mounting the CSL Elite Racing Wheel using the table clamp

Insert the threaded rod with handles into the table clamp.
Turn the table clamp screw into the bottom center of the CSL Elite Racing
Wheel.
Slide the CSL Elite Racing Wheel onto table
plate until the limiter blocks stop sliding at edge
of the table. Table clamp has to be below table
top.
12