FANATEC ClubSport Porche 918 RSR Quick Manual

MODE
In order to switch between modes, simultaneously press
and hold the two buttons highlighted below for one second.
The wheel base LED indicates the active mode:
● Red indicates PC mode
● Blue indicates PS4™ mode*
● Purple indicates compatibility mode*
* Not applicable for every Fanatec wheel base.
Please check the individual user manual of
your Fanatec wheel base.
BUTTON MAPPING
R2
6
Tuning
Button
5 L1
7 L2
25 N/A
11 L3
21 PS
10 R3
8 SHARE
CENTRE CALIBRATION
If a centre calibration is needed
(e.g: after firmware update of
ClubSport Wheel Base) when
using the steering wheel you
need to enter the Tuning
Menu by pressing the Tun-
ing Button.
When the Tuning Menu is
active, press the analogue
stick and the FunkySwitch™
at the same time as illustrated
on the right in order to calibrate
the wheel centre.
TUNING OPTIONS
In order to enter Tuning Menu, press the Tuning button.
In order to navigate inside the menu, use the right
FunkySwitch™. Press it up or down to access 5 setups.
Press the FunkySwitch™, right or left, to go through the
options and turn the FunkySwitch™ to change option
values.
Tuning Button
0
R1 4
3
SHIFTER CALIBRATION
24
D-Pad +
22 23
2
1
In order to enter shifter calibration mode, simultaneously
OPTIONS 9
press the Tuning Button and the button highlighted below.
Tuning Button
FunkySwitch™
Quick Guide
EN
www.fanatec.com