FANATEC McLaren GT3 Quick Manual

MODES

To switch between modes simultaneously press and hold
the buttons + , highlighted below, for one second.
The wheel base LED indicates the active mode:
- Green means Xbox One mode
- Red means PC mode
- Blue means PS4 mode*
TM
- Purple means compatibility mode*
* not applicable for every Fanatec wheel
base, please check the individual user
manual of your Fanatec wheel base.

CENTER CALIBRATION

If a center calibration is needed (e. g. after firmware
update of wheel base) you need to enter the tuning menu
by pressing the [TUNING MENU] Button. "SETTING" will
appear on the OLED display. Now turn the wheel to its
center position and then press the [FunkySwitch
buttons at the same time to calibrate the wheel center.
SETTING

TUNING MENU

FunkySwitch
TM

SHIFTER CALIBRATION

To enter shifter calibration mode, simultaneously press and
hold the [TUNING MENU] +
For the detailed process read the shifter manual.
TUNING MENU
TUNING MENU
To enter the tuning menu press the [TUNING MENU] button.
To navigate inside the menu, use the D-PAD [FunkySwitch
•
Press the [FunkySwitch
(SET 1, SET 2, ... 5)
•
Press the [FunkySwitch
] +
TM
options
•
Rotate the [FunkySwitch
values. The new values are in effect immediately and will
be stored inside the wheel base.
TUNING MENU
FunkySwitch
TM
buttons, as highlighted below.
]:
TM
] up or down to access 5 setups
TM
] right or left to go through the
TM
] left or right to change option
TM
QuickGuide
EN
Manufactured by
Fanatec is a registered trademark of Endor AG
®
Designed and developed by Endor AG in Germany
Seligenthaler Straße 16 a - 84034 Landshut - Germany
Telephone: +49 (871) 9221-122 Fax: +49 (871) 9221-221
Email: info.webshop@fanatec.com
Internet: www.fanatec.com - www.endor.ag
www.fanatec.com