FANATEC CSL Elite Racing Wheel Manual page 30

is controlled by the PC* driver (see chapter PC* driver for more details). Some
games support this feature. To change the active value, move the directional
stick of the Fanatec
7.3.3 FF (Force Feedback)
FF range: OFF
The Force Feedback defines the maximum strength of the motor when force
feedback effects from software / games are sent to the CSL Elite Racing Wheel.
If FF is set to OFF, there will be no force feedback effect executed by the CSL
Elite Racing Wheel motor. If FF is set to 001, the motor will execute only 1% of
the maximum motor power. If FF is set to 100, the motor will execute 100% of
the maximum motor power. To change the active value, move the directional
stick of the Fanatec
this setting at 100 and reduce the strength using the in-game setting to avoid
force feedback signal clipping.
7.3.4 SHO (Shock)
SHO range: OFF
The strength of the shock / vibration motors inside some Fanatec steering
wheels can be adjusted from 100% to 0%. These vibration motors can be used
by a game directly (Fanatec
Note: The CSL Elite Steering Wheel has no vibration motors.
7.3.5 ABS
ABS range: 000 ... 100
This feature gives you a direct feedback based on your brake inputs. If you set
the value to 100 the vibration will start as soon as you give 100% brake input
to the game. If you set it to 95% the vibration will start if you push the brake to
95% or more. The ABS feature uses the vibration within your wheel rim (can be
turned off by setting SHO to "0") AND the vibration motor on a CSP (V2 or V3)
pedal set if it is connected directly to the wheel base, not individually by USB.
ABS can also be simulated dynamically by the game if the developer makes
use of the Fanatec
of the Fanatec
*PC compatibility not tested nor endorsed by Sony Interactive Entertainment LLC.
30
steering wheel up or down.
®
001 ... 100
steering wheel up or down. It is recommended to leave
®
010 ... 100
SDK) or by the ABS function.
®
OFF
SDK. To change the active value, move the directional stick
®
steering wheel up or down.
®
FF default: 100
SHO default: 100
ABS default: OFF