Daily Maintenance; After-Season Maintenance - SaMASZ Z2-780 Operator's Manual

CAUTION:
Use only the tines recommended by the manufacturer.
CAUTION:
Before you change the tine check rotor turns (Fig. 28).

6.2. Daily maintenance

Everyday after work please carry out the following maintenance:
check all visible units and parts and their connections; tighten all loose bolts and nuts and
replace all damaged and/or worn parts with new genuine ones,
clean the rake each day after working,
clean the rake each day after working from mud, grass and dirt,
check rotor's condition,
grease PTO shaft tubes with STP grease,
if necessary, lubricate the parts and units according to lubrication instructions (chapter 7).

6.3. After-season maintenance

At the end of the season the rake should be cleaned, washed and dried. Carefully grease
unpainted surfaces and 3-point linkage pins. After that the following work should be carried out:
remove any traces of rust and paint the area affected,
check lubrication of intersecting axis gears. If leaks occur, remove them immediately,
periodically check the rake and secure the moving parts with grease to prevent the rake from
rust, which affects proper functioning of the rake.
The dismounted machine should be stored in a standstill position, so it is supported onto protected
support legs. It is recommended to store the set on a paved ground, preferably in dry, roofed places,
inaccessible to unauthorized personnel (mainly children). If the machine is exposed to weather
conditions, apply lubrication regularly.
Operator's manual
Fig. 28. Mounting of rake's tines
Double – sided rotary rake
Z2-780; Z2-840
- 21 -