Maintenance; Filter Capacity; Filter Replacement - ELRO 2300 Series Operating Instructions Manual

7

Maintenance

When operating the appliance with a filter, the customer must make sure that the manufacturer's instructions
(water hardness / filter capacity) are correctly entered in the appliance.
Otherwise, repairs and maintenance may only be carried out by ELRO After Sales Service or by service
companies authorized by ELRO. In other cases, all guarantee and regress claims are invalid and the
appliance may not be cleaned with high pressure (HPC) or a water jet.
This also applies to additions or adaptations which were not authorized by ELRO.
It is recommended to have your appliance checked for proper functioning every 4 years by ELRO After Sales
Service.
Exception: Float-frying *)
An annual check must be carried out and safety components must be replaced every 8 years!
7.1

Filter capacity

The filter capacity is entered via the user code „cooking programs settings". The following entries must
be made at appliance commissioning or when the filter is changed: confirm the filter capacity and the filter
replacement!

7.1.1 Filter replacement

Hinweis 87
Filterwechsel vorbereiten!
Restmenge < 5% der
Filterkapazität!
X101923E
, Fritomat *)
Before reaching the filter capacity, a maintenance message is generated
asking you to prepare for filter replacement.
Replace the filter. Confirm replacement with the user code „cooking programs
settings". Press
When replacing the filter, check the filter capacity based on the filter
manufacturer's data!
If you do not change the filter and the filter capacity is exhausted, you
CANNOT start a pressure cooking process.
You will be notified immediately with the adjacent error message. At the latest
now you MUST carry out the filter change and its confirmation.
filter replacement – the filter capacity values are reset!
27