Autolift *); Batches - ELRO 2300 Series Operating Instructions Manual

4.7 Autolift
2 5 1
4 7 6 8 3
5
2
left
2
5
right

4.7.1 Batches

X101923E
*)
1
4
8 4
3
Open the appliance lid. The Autolift is positioned slightly below the upper
stopper. Insert the frame holder clip (2) from left to right over the cam for the
frame holder (5).
and right onto the frame holder cams.
Press along the basket holder edges (8) until the basket holder clip (4) is
inserted in the basket holder cam (6). Lower the basket holder (3) into the
cooking chamber. The slide guides (7) must lie against the basin wall.
Make sure that the frame holder (1) and the basket holder (3) are securely
mounted. Load the GN baskets into the basket holder.
Lift or lower the GN baskets into the cooking chamber with
Autolift, by pressing again
Actuate , the Autolift lowers the baskets into the cooking chamber. After
the set time has elapsed, the horn sounds if activated and the display flashes.
The baskets are lifted out of the cooking chamber. During this time, the horn
sounds at regular intervals and the display flashes.
Touching the Autolift components can cause burning. Always use appropriate
protection (e.g. gloves) when handling GN baskets and frames during and
after the cooking process.
Regularly check the slide guides (7) for wear and tear. If wear and tear is heavy
the slide guides (7) must be replaced to avoid scratching of the cooking
chamber at next use.
Limbs or objects can be pinched in the moveable parts of the Autolift and the
cooking chamber. Makes sure that all areas are free before operation.
1 Frame holder
2
2 Frame holder clip
3 Basket holder
4 Basket holder clip
5 Frame holder cam
6 Basket holder cam
7 Slide guides
8 Basket holder edge
7
Place the basket edges (8) on the left
.
. Stop the
21