Table of Contents
Advertisement
4.1.6
Start time
Enter the time at which the appliance must heat up.
4.1.7
WDS Water dosing system
Cold water
Input via preset filling quantities
Set the desired amount of water. Choose between cold, warm or mixed water. Start the water outlet
If you want to stop the water outlet, press
4.1.8
Core temperature probe
If the appliance is equipped with a core temperature probe, you can activate it. The core temperature is
now displayed instead of the process time. Entering the core temperature is identical to entering the
temperature.
The 6-point core temperature probe makes cooking to the precise degree easy.
Make sure the probe is placed in the middle of the food.
4.1.9
Autolift
Process/Charge completed You can restart the process/Charge
Horn inactive Observe the display.
Load the basket holder with baskets and press
and the set time begins to run.
After the time has elapsed, the Autolift lifts the baskets out of the cooking chamber. The horn sounds and
the process status display flashes.
X101923E
Warm water
Individual input
again.
– Autolift Fritomat
*)
*)
*)
– Autolift Pastamat
*)
. The baskets are lowered into the cooking chamber
Mixed water
Individual input
*)
.
12
Hide quick links:
Advertisement
Table of Contents
