Tilting *); Elro Pms, Power Management System; Power Limitation System Lbs*) On Site - ELRO 2300 Series Operating Instructions Manual

*)
4.8 Tilting
easy-tilt
1
*)
easy-tilt electronic
2
4.9

ELRO PMS, Power Management System

With the ELRO PMS (Power Management System), you can reduce energy and installation costs. Three
to twelve appliances can be connected to a PMS system. The appliances share the specified total connected
load amongst each other. The result is a 30% reduction of the connected load of the appliance group.
Welcher Apparat kurzzeitig mit reduziertem Anschlusswert betrieben wird
(PMS aktiv), erkennen Sie an der blinkenden Temperatursymbol auf dem
Display der Steuerung 90. Beachten Sie, dass mit PMS die Heizung
kurzzeitig aus sein kann.
You can identify the appliance being temporarily operated with a reduced
connected load (PMS active) thanks to the blinking temperature symbol on
the display. Please note that with PMS, the heating system can be
temporarily switched off.
When the power supply and/or the communication line of an appliance in the
PMS group was interrupted for two weeks (14 days), error 26 appears on all
appliances in the PMS group when they are switched on. You must
acknowledge this message. Then you can start operating the appliance as
usual. It is recommended to have the data line be checked by the
responsible person (IT department, electrician) to make sure that the total
connected load for the PMS group is not exceeded.

4.10 Power limitation system LBS*) on site

This appliance can be prepared for connection to an external LBS system
reduce electrical power consumption. Time-staggered release of the output connections for appliances with
high connection values prevents exceeding of the average maximum permitted connection value for an object
(e.g. kitchen) within a given measurement period (e.g. 15 minutes). You can identify LBS system
thanks to the blinking temperature display on control 90. Please note that with LBS
be temporarily switched off. In order to avoid unnecessary deterioration of appliance control modes, please
adhere to the standard values established in the General Remarks/Installation Plan for heating systems –
minimum switch on and maximum switch off time.
X101923E
Open the appliance lid.
Turn the manual wheel (1) or the rotating wheel (2) in the desired direction to
tilt the cooking chamber.
If you start a process, or a process is active and is tilted
and the cooking chamber is not in the horizontal
position, you will see the adjacent system message.
Operation is only possible when the cooking chamber
is in the horizontal position. Adjust the tilting speed to
the filling level. Ensure that the front edge of the
cooking chamber is not subjected to any additional load
during tilting. There is a risk of scalding from hot food.
During tilting limbs or objects can be pinched or squashed in the area
between the basin and the console. Make sure this area is free before
operation.
Danger of burning! Accidental or jerky tilting can cause food or fat to overflow.
Hinweis
PMS: Datenbus
überprüfen!
*) . The aim of such a system is to
*)
intervention
*)
, the heating system can
22