Service And Maintenance; Environment; Eu Declaration Of Conformity - Festool KA 65 Operating Manual

KA 65
GB
9

Service and maintenance

WARNING
Risk of injury, electric shock

Always disconnect the mains plug from the
socket before performing maintenance work on
the machine!

All maintenance and repair work which requires
the motor housing to be opened must only be
carried out by an authorised service workshop.

Always keep the machine clean. Read chapter
8.3 and 8.4!

If the plastic sliding plate [2-1] (wear part) is
damaged, the plate can be replaced by loosen-
ing the 4 screws underneath the support base
[1-17].

Keep the ventilation slits on the electric power
tool clean and unobstructed to guarantee ade-
quate cooling.

Store in a cool location that is free of dust.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at: www.festool.com/service
EKAT
Use only original Festool spare parts!
4
Order No. at: www.festool.com/service
5
3
2
1
20
10

Environment

Do not dispose of the device in house-
hold waste! Recycle devices, accesso-
ries and packaging. Observe applica-
ble national regulations.
EU only: In accordance with European
Directive on waste electrical and electronic equip-
ment and implementation in national law, used
electric power tools must be collected separately
and handed in for environmentally friendly recy-
cling.
Information on REACh: www.festool.com/reach
11

EU Declaration of Conformity

Edge bander
KA 65
Year of CE mark: 2013
We declare under sole responsibility that this prod-
uct complies with all the relevant requirements in
the following Directives, standards and normative
documents:
2006/42/EG, 2004/108/EG, 2011/65/EU, EN 60745-
1, EN 55014-1, EN 55014-2, EN 61000-3-2, EN
61000-3-3.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Martin Zimmer
Head of Research, Development and Technical
Documentation
2013-09-12
Serial no.
10000233