Advertisement
ADJUSTMENTS
Tilt Adjustment
1.
Loosen Tilt Levers on each side of mount head (only enough to allow controlled adjustment) (Figure 6).
2.
Adjust tilt.
3.
Tighten locking Tilt Levers.
NOTE: Once the tilt levers are locked, the position of the levers can be adjusted without loosening or
tightening the unit by pulling the levers outward and then repositioning them to a vertical, less
obtrusive position.
Horizontal Adjustment
1.
To adjust the horizontal angle of the display, first slightly loosen the top two screws on back side of the Arm Assembly
Head Mount using Allen Key. Then firmly hold opposite corners of the display and gently turn it into the desired position.
When level, re-tighten screws to lock in position (Figure 6 and Figure 7).
6°
15°
Figure 6
Figure 7
6
Horizontal Level
Adjustment Screws
Tilt Lever
(1 on each side)
+/- 5°
Advertisement
