STRONG WALL MOUNT RACKS Strong equipment wall racks are available in sizes 10U, 12U, and16U, and are constructed with 11 gauge (3mm) thick rack rails and 14 gauge (2mm) thick top and bottom covers to provide extreme rigidity. Features include locking fronts, E-coated rack rails to maintain clean threads, and optional side panels and doors.
SR-WM-10,12, & 16U Installation and Users Manual ASSEMBLY STEPS 1. Prepare the Side Panels A. Insert rubber bumpers into the left side panel front edge. Insert rubber bumpers into the right side panel front edge and side. 2. Mount the Side Panels Right Side Panel Left Side Panel A.
See Install the Side Panels for assembly steps. 4. Attach the Wall Brackets CAUTION: Due to the weight and size of the Strong Wall Rack, it is recommend- ed that wall mounting be performed by 2 or more installers in order to avoid injury or damage to the rack.
Page 6
E. Slide the wall rack assembly onto the lag bolts in the wall, then finish tightening the bolts in the wall. CAUTION: This rack is intended for use only with Strong shelf models with a maximum combined load of 250 pounds. Use with heavier than the maximum load indicated may result in instability causing possible injury.
LIFETIME LIMITED WARRANTY All Strong™ products have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been Lifetime abused, modified or disassembled.