6.
Update the IP Address, Netmask, Gateway, and DNS Server 1 fields to
match your network.
Note: Do not make any other changes to the settings as it may affect proper
communications to the GeoNet mesh supervisor.
FIGURE 29: Update Fields
7.
Click OK.
8.
Use the ON/OFF switch to restart the module.
9.
Connect the add on Module to the GeoNet supervisor.
10. Enter the new IP address followed by :4001 in the Network Address field in
Agent software.
FIGURE 30: Enter the IP address followed by :4001
For more information on using Agent software, please refer to the Agent
Software Program instruction manual, available at https://www.geokon.com.
MODEL 8900 SERIES GEONET WIRELESS DATA HOSTING SYSTEM | MODEL 8800-2-4B ADD-ON MODULE | 25
29:
30: