Single-Channel Node; 10-Pin Connector (890X-Xx-01C-10P); Gland Seal (890X-Xx-01C-Cbl); Multi-Channel Nodes - Geokon GeoNet 8900 Series Instruction Manual

Wireless data hosting system

Hide thumbs Also See for GeoNet 8900 Series:

Table of Contents

4 | NETWORK COMPONENTS | GEOKON

2.3 SINGLE-CHANNEL NODE

A single-channel node will read one

pin cable or via a cable with stripped conductor wires, depending on model.

Though designed to send data wirelessly to a mesh supervisor, this model also

features a USB connector, for transferring data using a USB cable to a PC

running Agent software or other Modbus RTU client.

For use with gauges with 10-pin cable connectors.

For use with gauge cables that have stripped conductor wires. The gauge cable

passes through an external cable gland and is wired into the terminal block.

FIGURE 3: 10-Pin Single-Channel Node (left) and Gland-Seal Single-Channel Node (right)

GeoNet multi-channel nodes (MCNs) will read up to four or eight

vibrating wire gauges, depending on model, via cables with stripped conductor

wires. The cables pass through external cable glands and are wired into the

terminal blocks.

Though designed to send data wirelessly to a Supervisor, these models also

feature a USB connector for transferring data using a USB cable to a PC running

Agent software or other Modbus RTU client, just as with single-channel nodes.

FIGURE 4: Four-Channel Node (890X-XX-04C-CBL)

vibrating wire gauge, either via 10-

GEOKON

Table of Contents