TRENDnet TI-PG541i User Manual page 59

TRENDnet User's Guide
Web Configuration
Advanced Settings > PoE > Configuration
Parameter Description
Selects the PoE mode, classification or consumption.
Classification - Allocated power according to class (0 to 4).
PoE Mode
Consumption - Allocated power according to the actual need of
each PD.
Selects a port or a range of ports that you want to configure the
Port
PoE function.
Selects Enable to enable the PoE function on the specific port.
State
Selects Disable to disable the PoE function on the specific port.
Priority
Selects Critical / High / Low priority for the specific port.
Apply
Click Apply to take effect the settings.
Refresh
Click Refresh to begin configuring this screen afresh.
© Copyright 2016 TRENDnet. All Rights Reserved.
PoE Mode
Displays the current PoE mode.
Total Power
Displays the total power that the Switch supports.
Total Consuming
Displays the total consuming power for all of the PDs.
Power
External Power
Displays the status of the external power module.
Module
Port
Display the Port No.
State
Displays the PoE state for the specific port.
PD Priority
Displays the PoE priority for the specific port.
The field displays the class mode which the PSE negotiate with
Class
the PD on the specific port.
Consuming
Displays the consuming power for the specific port.
Power(mW)
Power
Displays the power allocated for the specific port.
Allocated(mW)
Current
Displays the current status for the specific port.
Status(mA)
PoE Schedule
The function has a global state configuration. If the global state configuration is disabled.
The Switch will not perform the schedule function. If the global state is enabled, the
Switch will check every port's configurations.
If the port's check configuration is NO for a specific day, the Switch will not perform action
for the specific port. If the port's check configuration is YES for a specific day, the Switch
will check the Start time and End Time. If the current time is in the interval between Start
time and End Time, the Switch will perform the action configuration. If the action is
ENABLE, the Switch will send power to the port. If the current time is not in the interval
between Start time and End Time, the Switch will not send power to the port.
Port:
TI-PG541i
49