TRENDnet TI-PG541i User Manual page 25

TRENDnet User's Guide
configure no mac-address-table
static MACADDR vlan
VLANID
configure clear mac address-
table dynamic
Example:
TI-PG541I(config)#mac-address-table static 00:11:22:33:44:55 vlan 1 port 1
Web Configuration
Basic Settings > MAC Management > Static MAC Settings
Static MAC
A static Media Access Control (MAC) address is an address that has been manually
entered in the MAC address table, and do not age out. When you set up static MAC
address rules, you are setting static MAC addresses for a port, so this may reduce the
need for broadcasting.
Parameter Description
Static MAC Settings
Enter the MAC address of a computer or device that you want to
MAC Address
add to the MAC address table.
© Copyright 2016 TRENDnet. All Rights Reserved.
This command removes a static unicast entry
from the address table.
This command clears the dynamic address
entries.
Valid format is hh:hh:hh:hh:hh:hh.
VLAN ID Enter the VLAN ID to apply to the computer or device.
Enter the port number to which the computer or device is
Port
connected.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
Static MAC Table
This field displays the MAC address of a manually entered MAC
MAC Address
address entry.
This field displays the VID of a manually entered MAC address
VLAN ID
entry.
This field displays the port number of a manually entered MAC
Port address entry. The MAC address with port CPU means the
Switch's MAC addresses itself.
Click Delete to remove this manually entered MAC address entry
Action from the MAC address table. You cannot delete the Switch's MAC
address from the static MAC address table.
TI-PG541i
15