TRENDnet TI-PG541i User Manual page 11

6-port hardened industrial gigabit poe+ layer 2 managed din-rail switch

Hide thumbs Also See for TI-PG541i:

Table of Contents

TRENDnet User's Guide

6. Click Basic Settings and then click General Settings.

7. Configure the switch IP address settings to be within your network subnet, then click

Apply.Note: You may need to modify the static IP address settings of your computer's

network adapter to IP address settings within your subnet in order to regain access to

the switch

8. Click Save at the top right.

9. When confirmation message appears click OK.

Note: Once the settings are saved, you can connect the switch to your network.

TI-PG541i

Table of Contents