TRENDnet TI-PG541i User Manual page 43

TRENDnet User's Guide
interface igmp-immediate-leave
interface no igmp-immediate-
leave
Example:
TI-PG541I(config)#igmp-snooping enable
TI-PG541I(config)#igmp-snooping vlan 1
TI-PG541I(config)#interface 1/0/1
TI-PG541I(config-if)#igmp-immediate-leave
TI-PG541I(config-if)#igmp-querier-mode fixed
TI-PG541I(config-if)#igmp-snooping group-limit 20
© Copyright 2016 TRENDnet. All Rights Reserved.
(Default:auto)
This command enables the IGMP Snooping
immediate leave function for the specific
interface.
This command disables the IGMP Snooping
immediate leave function for the specific
interface.
Web Configuration
General Settings
Advanced Settings > IGMP Snooping > IGMP Snooping > General Settings
Parameter Description
Select Enable to activate IGMP Snooping to forward group
IGMP Snooping
multicast traffic only to ports that are members of that group.
State
Select Disable to deactivate the feature.
Select Add and enter VLANs upon which the Switch is to perform
IGMP snooping. The valid range of VLAN IDs is between 1 and
IGMP Snooping
4094. Use a comma (,) or hyphen (-) to specify more than one
VLAN State
VLANs. Select Delete and enter VLANs on which to have the
Switch not perform IGMP snooping.
Specify the action to perform when the Switch receives an
Unknown
unknown multicast frame. Select Drop to discard the frame(s).
Multicast Packets
Select Flooding to send the frame(s) to all ports.
TI-PG541i
33