Error messages
Error message
The measurement could not be performed. Please
try again.
Connection error.
Blood pressure measurement could not be
performed
Causes
Hardware auto- check error.
There is a communication error between the
blood pressure monitor and the
collateral device.
- Cuff is not deflated before measurement.
- Noise interference.
- Excessive user movements.
Countermeasures
The measurement could not be performed.
Please try again. If the problem occurs again,
please contact customer service.
Push the blood pressure monitor button
for 3 seconds to turn it off. Quit the applica-
tion, turn your bluetooth connection off and
on. Push the blood pressure monitor button
to turn it on.
Please wait until the cuff is totally deflated
before starting a new measurement. Stay still
and do not speak during the measurement.
15