Withings BPM Connect Instruction Manual page 12

Important information
Requirements
To install your BPM Connect, you will need a device
with iOS (10.0 or higher) or Android (6.0 and higher).
After installation, you do not need your phone to take a
measurement. The device will sync via Wi-Fi or Bluetooth®.
Important safety information
Consult your doctor during pregnancy, or if you suffer from
arrhythmia and arteriosclerosis. Please read this section
carefully before using the Wi-Fi Smart Blood Pressure
monitor.
Intended use
The BPM Connect is a digital monitor intended for use in
measuring blood pressure and heart rate. The device is
intended to be used in a human adult population with an
arm circumference between 9 inches to 17 inches (22 cm
to 42 cm).
The BPM Connect is a medical device. The BPM Connect is
intended to be used at home. The BPM Connect must be
activated with the Withings Health Mate companion app.
Withings Health Mate companion app is an accessory to
the Withings BPM Connect and is not a medical device.
If you observe hypertensive values, contact your physician.
General safety and precautions
- Do not forcibly bend the arm cuff.
- Do not inflate the arm cuff when it is not wrapped around
your arm.
- Do not drop or apply strong shocks and vibrations to the
blood pressure monitor.
- Do not take measurements after bathing, drinking alcohol,
smoking, exercising or eating.
- Do not immerse the arm cuff in water.
- Do not use with a pacemaker, defibrillator or other
electric implant.
- Use the device on adults only.
- Do not use on children or pets.
Android is a trademark of Google Inc.
iOS is a trademark of Apple Inc.
12