General Cleaning Instructions; Clean Foot Part; Storage; Waste Disposal/Environmental Protection - Parkside PTPS 1100 A1 Translation Of The Original Instructions

This will prevent damage to the
equipment and any resulting per-
sonal injury.
Pull out the power plug before eve-
ry maintenance operation. There is
a risk of electrocution or of injury
from moving parts.
General cleaning
instructions
• In case of transport for utilization in
different locations, the pump must be
cleaned with clear water after every
use.
• In case of stationary installation, the
function of the float switch (
to be checked regularly (at the latest
every three months).
• With a water jet, remove fluff and
fibrous particles which are possibly
present in the pump casing.
• Regularly remove sludge from the pit
base and also clean the shaft walls.
• Clean precipitation from the float
switch with clear water.
• In the case of a long period of non-
use, the pump must be thoroughly
cleaned after the last use and before
the new use, since difficulties in start-
up can arise due to precipitation and
residues.

Clean foot part

Always remove the mains plug be-
fore working on the device.
Moving parts create the risk of
electrocution or injury.
Dirt on the bottom of the pump can be was-
hed down with clear water.
Any measures above and beyond these,
particularly opening the equipment, are
to be carried out by an electrician. In the
case of repairs, always contact our service
centre.

Storage

• Keep the equipment clean, dry and out
of the reach of children.
• Unscrew the bracket adapter (
storage.
• Wind up the power supply cable (4)
and hang it between the handle (1) and
the float switch height adjustment (2) on
3) is
the float switch height adjustment bra-
cket (2). See illustration
Waste Disposal/Envi-
ronmental Protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Do not dispose of electrical appli-
ances as unsorted municipal waste,
use separate collection facilities.
Hand over the device at an utilization loca-
tion. The plastic and metal parts employed
can be separated out and thus recycled
use can be implemented. Ask our Service-
Center for details.
Defective units returned to us will be dis-
posed of for free.
GB IE
9) for
.
25