Wacom Cintiq DTK-2100 Installation Manual page 66

6. Taking care not to dislodge the bearing stopper from the hub section, position the two halves of
the bearing hub together around the pen display cable and over their attachment points.
7. Attach the bearing hub sections to the unit making sure to use the correct screws for
reattachment. (The bearing hub screws are longer than the cable cover plate screws.)
Appendix
Page 64
Proper positioning shows the hub
sections aligned along the
horizontal axis of the pen display.
The section containing the bearing
stopper should be positioned
toward the top of the pen display.