Dst Settings - Yealink SIP-T2 Series Administrator's Manual

Menu->Basic->Time & Date->General->SNTP Settings->NTP Server2
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Basic Settings->Time&Date->SNTP Settings->NTP Server2
Parameter local_time.interval
Description It configures the interval (in seconds) at which the phone updates time and date from the NTP server.
Permitted
Integer from 15 to 86400
Values
Default 1000
Web UI Settings->Time&Date->Update Interval (15~86400s)
Parameter local_time.time_zone
Description It configures the time zone.
-12 to +14
Permitted
Values
For available time zones, refer to
Default +8
Web UI Settings->Time&Date->Time Zone
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Time & Date->General->SNTP Settings->Time Zone
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Basic Settings->Time&Date->SNTP Settings->Time Zone
Parameter local_time.time_zone_name
It configures the time zone name.
Description
Note: It works only if "local_time.summer_time" is set to 2 (Automatic) and the parameter "local_time.-
time_zone" should be configured in advance.
String within 32 characters
Permitted
The available time zone names depend on the time zone configured by the parameter "local_time.time_
Values
zone". For available time zone names, refer to
Default China(Beijing)
Web UI Settings->Time&Date->Location
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Time & Date->General->SNTP Settings->Location
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Basic Settings->Time&Date->SNTP Settings->Location

DST Settings

You can set DST for the desired area as required. By default, the DST is set to Automatic, so it can be adjusted auto-
matically from the current time zone configuration.
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Time Zone.
<y0000000000xx>.cfg
Time Zone.
Phone Customization
125