Configuring A Provisioning Server - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Note
A URL should contain forward slashes instead of backslashes and should not contain spaces. Escape characters are not sup-
ported.
If a user name and password are not specified as part of the provisioning server address, the User Name and Password
of the provisioning server configured on the phone will be used.
The following table lists the parameters you can use to configure static provision.
Parameter static.auto_provision.server.url
Description It configures the access URL of the provisioning server.
Permitted
URL within 511 characters
Values
Default Blank
Web UI Settings->Auto Provision->Server URL
Parameter static.auto_provision.server.username
Description It configures the user name for provisioning server access.
Permitted
String within 32 characters
Values
Default Blank
Web UI Settings->Auto Provision->User Name
Parameter static.auto_provision.server.password
Description It configures the password for provisioning server access.
Permitted
String within 32 characters
Values
Default Blank
Web UI Settings->Auto Provision->Password

Configuring a Provisioning Server

The provisioning server can be set up on the local LAN or anywhere on the Internet. Use the following procedure as a
recommendation if this is your first provisioning server setup.
To set up the provisioning server:
1. Install a provisioning server application or locate a suitable existing server, such as 3CDaemon.
2. Create an account and home directory.
3. Set security permissions for the account.
4. Create boot files and configuration files, and then edit them as desired.
5. Copy the boot files, configuration files and resource files to the provisioning server.
6. If performing static provisioning, obtain the provisioning server address.
Tip
Typically, all phones are configured with the same server account, but the server account provides a means of conveniently
partitioning the configuration. Give each account a unique home directory on the server and change the configuration on a
per-line basis.
86
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg