Usb Port Lock Configuration; Search Source List In Dialing - Yealink SIP-T2 Series Administrator's Manual

Adding a Wallpaper from a USB Flash Drive
l
Adding a Screensaver Picture from a USB Flash Drive
l
Wi-Fi (except CP920)
l
Bluetooth (except T54S/T52S/CP920)
l
USB Recording
l
Topic

USB Port Lock Configuration

USB Port Lock Configuration
The following table lists the parameters you can use to configure USB port lock.
Parameter static.usb.power.enable
It enables or disables the USB port.
Description
Note: It is only applicable to T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G/CP920 IP phones.
0-Disabled, the phone does not provide power to the USB port and not detect USB devices attached to
Permitted
the USB port. All of the USB devices are disabled on the IP phone
Values
1-Enabled
Default 1
Parameter static.usbdisk.function.enable
It enables or disables the USB flash drive feature.
Description
Note: It works only if "static.usb.power.enable" is set to 1 (Enabled) and only applicable to
T46S/T48S/T52S/T54S/CP920 IP phones.
0-Disabled, the phone cannot detect the USB flash drive attached to the USB port. The USB item will not
Permitted
appear on the menu screen and there is no USB icon on the status bar. Only the USB flash drive is dis-
Values
abled, other USB devices such as Bluetooth dongle are still available on the IP phone.
1-Enabled
Default 1
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.

Search Source List in Dialing

Search source list in dialing allows you to search entries from the source list when the phone is on the pre-dial-
ing/dialing screen. You can select the desired entry to dial out quickly.
The following shows search results displayed on T46S/G IP phones:
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Customization
189