KidKraft GREYSTONE COTTAGE Installation And Operating Instructions Manual page 19

Step 3: Attach Soffits
It is important to note hole orientations for the following steps.
A: Flush to the inside face of the Left Side Wall, centre 1 (031) Soffit and attach with 4 (S20) #8 x 1-3/8" Wood
Screws. Notice the 2 unused holes on the outside as shown in fig. 3.1 and 3.2.
B: Flush to the inside face of the Right Side Wall panel center 1 (034) Soffit Wide and attach using 4 (S20) #8 x
1-3/8" Wood Screws.
C: On the Front Wall and Back wall, tight to the (031) Soffit and flush to the inside face of each wall attach 1
(032) Soffit Long to each wall using 6 (S20) #8 x 1-3/8" Wood Screws per board. Note hole orientations. (Fig.
3.1 and 3.2)
D: Tight to the (032) Soffit Longs and flush to the outside face of each wall attach 1 (033) Soffit Short per wall
using 3 (S20) #8 x 1-3/8" Wood Screws per board.
Fig. 3.1
1" overhang
Left Wall
Notice the
2 unused
holes
031
1" overhang
Fig. 3.2
Wood Parts
1 x Soffit 5/8 x 2-7/8 x 34"
031
2 x Soffit Long 5/8 x 2-1/2 x 47-1/2"
032
2 x Soffit Short 5/8 x 2-1/2 x 15-7/8"
033
1 x Soffit Wide 5/8 x 3-1/2 x 34"
034
Notice hole orientations
032
Flush inside face
Notice hole orientations
032
Hardware
26 x #8 x 1-3/8" Wood Screw
S20
Back Wall
Flush outside face
Front Wall
19
033
034
Right Wall
033
x 26
S20