KidKraft GREYSTONE COTTAGE Installation And Operating Instructions Manual page 25

Step 5: Attach Café Accessories
Part 5
Note: Install 2 AAA/LR03 batteries in Doorbell 2 prior to attaching to assembly. To replace batteries
remove back cover on Doorbell 2, remove both batteries, insert 2 new batteries ensuring the proper
polarity is observed then replace back cover.
H: From inside the assembly insert Doorbell 2 into the hole in the Door Wall and attach with 2 (S0) #8 x 7/8"
Truss Screws. (fig. 5.10 and 5.11)
I: On the outside of the assembly place Doorbell Trim over the hole in the Door Wall so when you press it the
doorbell rings then attach with 2 (S37) #7 x 5/8" Pan Screws as shown in fig. 5.10.
Fig. 5.10
S0
Doorbell 2
Doorbell Trim
Hardware
2 x #7 x 5/8" Pan Screw
S37
2 x #8 x 7/8" Truss Screw
S0
25
Fig. 5.11
Inside View
S37
Panel
Assembly B
Other Parts
1 x Door Bell 2
1 x Door Trim