Validate The System; Return Old Parts To Overland - Overland Storage SnapServer DX2 Upgrade Instructions

Spare Chassis Upgrade Instructions
Important – Read This Before Continuing
If the version of GuardianOS on the new chassis is different
from the version on the disk drives, the appliance goes through
a special initialization and synchronization process that can
take up to 10 minutes to complete. During this time, the
Status LED flashes an alternating green and amber pattern.
Do NOT remove the power in this state.
Once initialization is complete, the system automatically
reboots and the Status LED displays a solid green color.
If the GuardianOS versions are the same on both the chassis
and drives, the appliance boots normally.

Validate the System

Log onto the SnapServer Web Management Interface and
verify your connections and settings. Check for flashing front
LEDs indicating errors. Refer to the user guide to resolve.
NOTE: If the server was configured as an EDR master console, new
licenses must be installed, as they are based on the server number.
If there are any problems, contact Overland Technical Support:
http://docs.overlandstorage.com/support

Return Old Parts to Overland

1. Place the old chassis in the anti-static bag and put it in
the replacement part's box.
2. Place the old bezel and old rail kit (both inner and outer
rails) in the top packing box
3. Put the packing box in the top of the shipping box.
4. Close and seal the box.
5. Use an RMA to return the parts to Overland Storage.
For return shipping details and RMA number, go to:
http://docs.overlandstorage.com/return-instructions
http://support.overlandstorage.com
You can get additional technical support on the Internet at the
the information found on the
10400450-001 05/2013
render the appliance inoperable.
Overland Storage Support web
Contact Us page on our web site.
©2013 Overland Storage, Inc.
CAUTION:
Under no circumstances should power be
removed while the system is in this state! Doing so may
Rails
Chassis
page, or by contacting Overland Storage using
Status
Bezel
Page 5 of 5
