Table of Contents
Advertisement
Maintenance
Cleaning the radio
Ensure the unit is fully unplugged from the mains socket before cleaning.
•
To clean the unit, wipe the case with a slightly moist, lint-free cloth.
•
The speaker grille can be cleaned carefully with a soft paintbrush or similar.
•
Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
•
Do not spray an aerosol at or near the unit.
Troubleshooting
If a problem does occur, it may often be due to something very minor. The following table
contains various tips.
Symptom
No power.
Poor radio reception.
No radio information text.
No response to the controls
LDABXRW13_IB_V6.indd 19
Suggestion
•
Check that the AC adapter is connected and plugged
into a power socket.
•
When battery powered, the batteries may be
exhausted. Try a fresh set.
•
The signal may be weak. Try re-positioning the aerial. If
this doesn't work check the radio in a different location.
Avoid placing the radio near computers and other
electronic equipment.
•
The signal may be too weak to receive information text.
•
Not all stations broadcast information text.
•
Disconnect AC power and remove batteries when
fitted. Wait 10 seconds. Re-connect AC power or re-fit
the batteries.
19
26/06/2014 17:29
Hide quick links:
Advertisement
Table of Contents
