Maintenance; Hints And Tips; Specifications - Logik L5DABIP13E Instruction Manual

Maintenance

Ensure the unit is fully unplugged from the mains socket before cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
• Do not spray an aerosol at or near the unit.

Hints and Tips

If a problem does occur, it may often be due to something very minor. The following table
contains various tips.
Problem
No Sound
Static Sound
Sound is distorted
Desired station not found
The display shows "Not
available"
The display is blank
Alarm didn't sound

Specifications

Model
Mains Adapter
Power Output
Radio Frequency
Net Weight
Features and specifications are subject to change without prior notice.
Adjust the volume control, it may not be turned up.
Signal reception is too low. Adjust the aerial or move the unit to
a stronger signal location.
Volume is too high. Adjust the volume control.
Weak signal. Use the Manual Tune function.
No DAB coverage in your area.
Poor reception. Adjust the position of the aerial.
This may occur if the broadcaster changes the label of a service
or removes a label while tuned. The unit will try to retune or
perform a scan.
Check the alarm is set, the alarm icon will be displayed when it
is set.
Adjust the alarm volume it may be set too low.
L5DABIP13E
Input AC 100-240V ~50/60 Hz, 2000mA
2W RMS
FM 87.5 – 108 MHz
DAB 174.928 – 239.200 MHz
2.85kg
Cause / Solution
GB
17