Maintenance; Hints And Tips; Specification - Logik L44DAB10 Instruction Manual

Maintenance

Ensure to unplug the unit from the mains socket before cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
• Do not spray an aerosol at or near the unit.

Hints and Tips

Problem
No Sound
Static Sound
Sound is distorted
Desired station not
found
The display shows "Not
available"
The display is blank

Specification

Mains Supply
Output Power
Radio Frequency
Range
Features and specifications are subject to change without prior notice.
Adjust the volume control, it may not be turned up.
Signal reception is too low. Adjust the aerial or move the unit to a
stronger signal location.
Volume is too high. Adjust the volume control.
Weak signal. Use the Manual Tune function.
No DAB coverage in your area or poor reception. Adjust the position
of the aerial.
Poor reception. Adjust the position of the aerial.
This may occur if the broadcaster changes the label of a service or
removes a label. The unit will try to retune or perform a scan.
Mains adapter Input 100-240V ~ 50/60 Hz
Mains adapter Output DC 6V 0.5A
DC battery 4 x AA batteries (not included)
1 x 1.6W
FM87.5 – 108 MHz
DAB Band III 174.928 – 239.200 MHz
Cause / Solution
15