Mains Power; Standby Control - Logik LDABXRW13 Instruction Manual

Getting Started

Mains Power

This unit is designed only to operate with the supplied AC adapter.
Connecting the radio to any other power source may damage it.
• Unwind the AC adapter cable to its full length.
Connect the plug at the end of the cable to the DC IN Socket on the back of the radio.
•
• Plug the AC adapter into a mains socket and switch the socket on (if necessary).
The unit is now connected and ready to use.
• To switch the unit off completely, unplug the mains adapter from the mains socket.

Standby Control

When you first connect the radio to the mains socket, the radio will be in standby.
Press STANDBY to switch the unit on or to switch the unit to standby mode when on.
•
Disconnect the AC adapter from the mains socket if you want to switch the unit off
completely.
LDABXRW13_IB_V6.indd 7
OPEN OPEN OPEN OPEN OPEN OPEN OPEN OPEN OPEN OPEN
7
26/06/2014 17:29