Router Accessory Installation - TACKLIFE PTR01A User Manual

ROUTER ACCESSORY INSTALLATION

1. Remove any accessory already installed on the tool.
2. Turn the router base locking knob (1) counter clockwise until it no longer protrudes inside the
mounting collar (2) (Fig. 15).
3. Slide the router base mounting collar onto the bottom of motor housing (3). Align the spindle
locking button (4) with the spindle locking button opening (5). Align the key (6) on the motor
housing with the matching key way in the mounting collar.
NOTE: The raised hole in the mounting collar will slide over the spindle locking button.
4. Slide the motor housing into the mounting collar as far as it will go, then twist the motor housing
clockwise approximately 10° to lock the motor housing key and key way.
Fig. 15
- 19 -