* The active pedal(requiring a battery) will NOT work and may damage the EFX Mk II Audio
Controller.
* Connect a expression pedal to the XPDL jack before the power applies to EFX MkII Audio
Controller.
3.3.4 Conversion of Audio Loop into Control Function
Audio loop function 7 and 8 can be converted into control function 7 and 8.
The CTL7 and CTL8 jacks can be used as latching N.O.(Normally Open) or N.C.(Normally
Closed) switches for remote amplifier channel switching.
* The conversions are global (the same for all banks/presets). you need not edit this for any
other banks/presets if you have already done so.
①
Press/hold the PS-1 switch(FS, function select) to convert audio loop 7 into control function 7
until the LP7 is shown on the display if you are already in the Edit Mode.
②
Press the BANK UP switch to convert
It will automatically be stored in memory.
LP7 means that the audio loop 7 is selected.
Ct7 means that the control function 7 is selected.
③
Follow the same procedure
Cable Wiring
Standard 1/4" stereo or mono plugs connect to the CTL7 and CTL8 jacks.
EFX MkII Audio Controller User Manual
LP7 into Ct7. The display will show:
① ②
~
to convert
LP8 into Ct8
10