Parallel Panel Holder - Permobil M1 User Manual

4.10.10 Parallel panel holder

You can adjust the distance between the armrest and the control panel. It is
also possible to adjust the angle of the control panel.
This is how you adjust the distance between the armrest and the control
panel. Leave a gap of at least 10 mm (0.4") between the armrest and the
control panel.
Torque wrench
Allen key 5 mm
1. Loosen screws enough to slide the panel holder.
2. Adjust the panel to the preferred position.
3. Torque the screws to 9.8 N m (7.2 lb. ft.).
Wheelchair usage - 55