Permobil M1 User Manual page 68

Event
The ROHO AGILITY air insert is not
holding air.
The ROHO AGILITY air insert does not
feel comfortable.
The ROHO AGILITY air insert slides
inside the cover.
68 - Troubleshooting
Possible cause
The inflation valve is not closed.
The inflation valve is damaged.
There are holes in the cushion.
The air insert is not properly adjusted.
The air insert is not properly inserted.
The air insert is not properly inserted.
Remedy
Turn the inflation valve clockwise. Make
sure that it is completely closed.
Inspect the inflation valve and the hose.
Look for holes in the cushion. If very
small holes or no holes are visible, follow
the instructions in the repair kit supplied.
Add or remove air to adjust to the
preferred level.
Make sure that the air cells are facing the
front of the wheelchair and that the cover
is properly positioned.
Make sure that the air insert is properly
positioned and that the fabric is secured to
the fastener strip in the cutout area of the
foam pad. The perimeter of the air insert
should be tucked in between the foam
layers around the edge of the cutout area.