Raven SmarTrax Installation Manual page 11
Ag-chem rogator 864, 874, 1064, 1064c, 1074, 1264, 1264c, 1274, 1274c, ss
Hide thumbs
Also See for SmarTrax:
- Calibration and operation manual (156 pages) ,
- Operation manual (73 pages) ,
- Installation manual (59 pages)
Table of Contents
Advertisement
Disconnecting
T and P Ports
1.
Label original T and P hoses and their corresponding ports on the SCU.
Original
T Hose
T and P Ports on the SCU, Original T and P Hoses
2.
Disconnect the original Tank hose from the Tank port.
3.
Attach the run end of the tee connector (3/4" JIC) to the Tank port.
4.
Reattach the original Tank hose to the tee connector.
5.
Disconnect the Pressure hose from the Pressure port.
6.
Attach the run end of the tee connector (3/4" JIC) to the Pressure port.
7.
Reattach the original Pressure hose to the tee connector.
Original
T Hose
Reconnecting Original T and P Hoses to the SCU
T Port
P Port
Original
P Hose
T Port
P Port
Original
P Hose
Manual # 016-0190-031
9
Advertisement
Table of Contents
