Voice Guide; Using Your Built-In Answering System; New Message Indication - VTech CS6928-2 User Manual

Voice guide

This feature is an alternative way for you
to do the basic setup of the answering
system. You can follow the voice guide
to record your own announcement, set
the number of rings and the message
alert tone.
Press MENU when the phone is not
1.
in use.
2. Press or to scroll to Answering
sys, and then press SELECT.
to scroll to Voice guide,
3. Press or
the press SELECT. You hear the
voice prompt "Hello! This voice guide
will assist you with the basic setup of
your answering system."
4. Setup your answering system by
inputting designated numbers as
instructed in the voice guide.
NOTE
You can press CANCEL to quit the voice
•
guide at anytime.
Using your built-in answering
system

New message indication

The message window in the telephone
base flashes and XX new messages
displays on the handset when there are
new answering system messages.
Message
window
display
No messages.
0
Total number of old messages and
1-99
memos recorded.
The message number currently
playing.
Total number of new messages
0-99
recorded, or the current message
number during new message
(flashing)
playback.
The clock needs to be set.
The answering system memory is
1-99 & F
full with total number of messages
(alternating)
recorded.
The telephone base speaker
1-8
volume level while adjusting.
The telephone base ringer level
0-6
while adjusting.
The answering system is
--
answering a call, or recording a
memo or announcement.
The handset is on a call, or in the
caller ID log.
The answering system is being
accessed remotely.
If the message alert tone is turned on,
the telephone base beeps every
10 seconds when there are messages
that have not been reviewed.
28
Description