Securing Nuts And Bolts; Lubrication; Clutch Cable Adjustment - Hayter HARRIER 41 Owner's Handbook Manual

1.28

SECURING NUTS AND BOLTS

Regularly check that all securing nuts and bolts are tight.
Replace missing or damaged items immediately.

LUBRICATION

Lubricate the wheels, pivot points and linkages with engine
oil every 25 operating hours.
Apply a good quality medium grease to the inner control
cables at the point of entry and exit from their outer casings.

CLUTCH CABLE ADJUSTMENT

Check the clutch cable operation every 25 operating hours
and adjust if necessary. The clutch cable is adjusted correct-
ly when the belt drive just engages with the clutch lever posi-
tioned 32-38mm from the handlebar.
Unscrew the locknut and screw the adjuster as necessary. If
there is insufficient thread adjustment the bracket position
should be altered by removing the retaining screw and re-
assembling the bracket to the handlebar using an alternative
mounting hole. Tighten the locknut when correctly adjusted.
IMPORTANT - PREVENT DAMAGE: ALWAYS oper-
ate the mower with the clutch cable correctly adjusted.
ALWAYS replace damaged cables.
MAINTENANCE
Auto Drive models only.
1.28
CS015
CS022
32 - 38 mm
CS172
Locknut
Bracket
Locknut
Adjuster
Screw
CS134
305144MA050899A